Yaskawa MEMOCON GL120 - Manual (Page 147)

4.3 CPU Modules
— 4-91 —
b) Connecting Port 2 to an ASCII Device: Bar Code Reader
Local channel
Rack 1 (CPU Rack)
MB10
W0221-03 cable
ACGC4250 FA Monitor
Slot No.
Port 2 Port 1
Communications via
COMM instruction
Data input
Monitor information
Setting information
Communications via
MEMOBUS protocol
Bar code reader with
RS-232C interface
Note Set MEMOBUS port 2
as a master port and to
Transparent Mode.
PS10: Power Supply Module (7 A)
CPU10: CPU10 Module (8 KW)
MB10:
10-slot Mounting Base
MC20: Four-axis Motion Module
DI: 12/24 VDC 16-point Input Module
DO: 12/24 VDC 16-point Output Module
W0203-03: MEMOBUS cable (2.5 m)
W0221-03: MEMOBUS cable (3.0 m)
Figure 4.22 Application Examples for MEMOBUS Ports: Bar Code Reader
4