Yaskawa MEMOCON GL120 - Manual (Page 257)

4.4 Communications Modules
— 4-201 —
3. Specifications
The specifications of the Ethernet Interface Module are shown in the following table.
Table 4.83 Specification of Ethernet Interface Module
Item Specifications
Name Ethernet Interface Module
Model Name EIF
Model No. JAMSC−120NET12100
External Dimensions Width: 40.3 mm
Height: 130 mm
Depth: 103.9 mm
Approximate Mass 300 g
Internal Current Consumption 10Base5: 1.5 A
10Base-T: 1.0 A
Note
Power is supplied to the AUI (Attachment
Unit Interface) from the GL120/GL130
Power Module through the Ethernet Inter-
face Unit.
Maximum Heating Value 7.5 W
Hot Swapping (Removal/Insertion Under
Power)
Permitted.
Mounting Location Any slot of the CPU Rack of the local channel
Applicable CPU Modules CPU20 (16 kW) (DDSCR−120CPU34100)
CPU30 (32 kW) (DDSCR−130CPU54100)
CPU35 (40 kW) (DDSCR−130CPU54110)
Ethernet Port
S ifi i
Port Name 10Base5 10Base-T
Specifications Media Access Control
Method
CSMA/CD
Baud Rate 10 Mbps
Modulation Method Baseband
Segment Length 500 m max. 100 m max.
(Between hub
(repeater) and node)
Number of Nodes 100 per segment
(Within a coaxial
segment)
2 per segment
(Within a 10Base-T
segment)
Transmission Medium Transceiver cable Twisted-pair cable
Protocol TCP/IP or UDP/IP
Data Type ASCII or binary
External Connections AUI connector (with
slide lock)
RJ-45 connector
Note The Ethernet Interface Module cannot be used with a CPU10 or CPU21.
4