Rainbow Electronics GM862-QUAD-PY User Manual
Page 126
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 126 of 434
+CPBR - Read Phonebook Entries
SELINT 0 / 1
phonebook memory
<index2> - integer type value in the range of location numbers of
phonebook memory
The response format is:
+CPBR: <index>,<number>,<type>,<text>
where:
<index> - the current position number of the PB index (to see the range of
values use +CPBR=?)
<number> - string type phone number in format <type>
<type> - type of phone number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
<text> - the alphanumeric text associated to the number; used character set
should be the one selected with command +CSCS.
Note: if “MC” is the current selected phonebook memory storage, all the
missed calls coming from the same number will be saved as one missed
call and +CPBR will show just one line of information.
Note: If all queried locations are empty (but available), no information text
lines will be returned, while if listing fails in an ME error, +CME ERROR:
<err> is returned.
AT+CPBR=?
Test command returns the supported range of values of the parameters in
the form:
+CPBR: (<minIndex> - <maxIndex>),<nlength>,<tlength>
where:
<minIndex> - the minimum <index> number, integer type
<maxIndex> - the maximum <index> number, integer type
<nlength> - maximum <number> field length, integer type
<tlength> - maximum <name> field length, integer type
Note
Remember to select the PB storage with +CPBS command before issuing
PB commands.
Reference GSM
07.07
+CPBR - Read Phonebook Entries
SELINT 2
AT+CPBR=
<index1>
[,<index2>]
Execution command returns phonebook entries in location number range
<index1>..<index2> from the current phonebook memory storage selected
with +CPBS. If <index2> is omitted, only location <index1> is returned.
Parameters:
<index1> - integer type, value in the range of location numbers of the
currently selected phonebook memory storage (see +CPBS).
<index2> - integer type, value in the range of location numbers of the