Rainbow Electronics GM862-QUAD-PY User Manual
Page 382
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 382 of 434
#CSURVC - Network Survey (Numeric Format)
SELINT 0 / 1
<cellStatus>,<numArfcn>[,<arfcn1> ..[ <arfcn64>]]
[,<numChannels>[,<ba1> ..[<ba32>]][,<pbcch> [,<nom>,<rac>,<spgc>,
<pat>,<nco>,<t3168>,<t3192>,<drxmax>,<ctrlAck>,<bsCVmax>,
<alpha>,<pcMeasCh>]]]
<CR><LF><CR><LF><CR><LF>
where:
<arfcn> - C0 carrier assigned radio channel (BCCH - Broadcast Control
Channel)
<bsic> - base station identification code
<rxLev> - receiption level (in dBm)
<ber> - bit error rate (in %)
<mcc> - mobile country code
<mnc> - mobile network code
<lac> - location area code
<cellId> - cell identifier
<cellStatus> - cell status
..0 - C0 is a suitable cell (CELL_SUITABLE).
1 - the cell is low priority based on the received system information
(CELL_LOW_PRIORITY).
2 - the cell is forbidden (CELL_FORBIDDEN).
3 - the cell is barred based on the received system information
(CELL_BARRED).
4 - the cell <rxLev> is low (CELL_LOW_LEVEL).
5 - none of the above e.g. exclusion timer running, no BCCH
available…etc.. (CELL_OTHER).
<numArfcn> - number of valid channels in the Cell Channel Description
<arfcnn> - arfcn of a valid channel in the Cell Channel Description (n is in
the range 1..<numArfcn>)
<numChannels> - number of valid channels in the BCCH Allocation list;
the output of this information for non-serving cells depends on
last #CSURVEXT setting:
1. if #CSURVEXT=0 this information is displayed only for
serving cell
2. if
#CSURVEXT=1 or 2 this information is displayed also for
every valid scanned BCCH carrier.
<ban> - arfcn of a valid channel in the BA list (n is in the range
1..<numChannels>); the output of this information for non-
serving cells depends on last #CSURVEXT setting:
1. if #CSURVEXT=0 this information is displayed only for
serving cell
2. if
#CSURVEXT=1 or 2 this information is displayed also for
every valid scanned BCCH carrier.
(The following informations will be printed only if GPRS is supported in the
cell)
<pbcch> - packet broadcast control channel
0 - pbcch not activated on the cell