Rainbow Electronics GM862-QUAD-PY - Manual (Page 387)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 387 of 434
#CSURVC - Network Survey (Numeric Format) SELINT 2
Network survey ended
OK
Note The command is executed within max. 2 minute.
The information provided by #CSURVC is the same as that provided by
#CSURV. The difference is that the output of #CSURVC is in numeric
format only.
3.5.7.7.3 Network Survey Of User Defined Channels - #CSURVU
#CSURVU - Network Survey Of User Defined Channels SELINT 0 / 1
AT#CSURVU=[
<ch1>[,<ch2>[,…
[,<ch10>]]]]
AT*CSURVU=[
<ch1>[,<ch2>[,…
[,<ch10>]]]]
(both syntax are
possible) Execution command allows to perform a quick survey through the given
channels. The range of available channels depends on the last #BND
issue.
The result format is like command #CSURV.
Parameters:
<chn> - channel number (arfcn)
Note: issuing AT#CSURVU=<CR> is the same as issuing the command
AT#CSURVU=0<CR>.
Example AT#CSURVU=59,110
Network survey started…
arfcn: 59 bsic: 16 rxLev: -76 ber: 0.00 mcc: 546 mnc: 1
lac: 54717 cellId: 21093 cellStatus: CELL_SUITABLE
numArfcn 2 arfcn: 36 59
arfcn: 110 rxLev: -107
Network survey ended
OK
Note The command is executed within max. 2 minute.
#CSURVU - Network Survey Of User Defined Channels
SELINT 2
AT#CSURVU=[
<ch1>[,<ch2>[,…
[,<ch10>]]]]
AT*CSURVU=[
<ch1>[,<ch2>[,… Execution command allows to perform a quick survey through the given
channels. The range of available channels depends on the last #BND
issue.
The result format is like command #CSURV.