Rainbow Electronics GM862-QUAD-PY User Manual

Page 182

Advertising

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 182 of 434

+CSCB -Select Cell Broadcast Message Types

SELINT 0 / 1

[<mode>
[,<mids>
[,<dcss>]]]]

received by the device.

Parameter:
<mode>
0 - the message types defined by <mids> and <dcss> are accepted

(factory default)

1 - the message types defined by <mids> and <dcss> are rejected
<mids> - Message Identifiers, string type: all different possible

combinations of the CBM message identifiers; default is empty
string (“”).

<dcss> - Data Coding Schemes, string type: all different possible

combinations of CBM data coding schemes; default is empty string
(“”).

Note: the current settings are stored through +CSAS

Note: issuing AT+CSCB<CR> is the same as issuing the Read command.

Note: issuing AT+CSCB=<CR> is the same as issuing the command
AT+CSCB=0<CR>.

AT+CSCB?

Read command reports the current value of parameters <mode>, <mids>
and <dcss>.

AT+CSCB=?

Test command returns the range of values for parameter <mode>.

Example

AT+CSCB?

+CSCB: 1,"",""

OK

(all CBMs are accepted, none is rejected)

AT+CSCB=0,"0,1,300-315,450","0-3"
OK

Reference

GSM 07.05, GSM 03.41, GSM 03.38.

CSCB -Select Cell Broadcast Message Types

SELINT 2

AT+CSCB=
[<mode>[,<mids>
[,<dcss>]]]

Set command selects which types of Cell Broadcast Messages are to be
received by the device.

Parameters:
<mode>
0 - the message types defined by <mids> and <dcss> are accepted