Rainbow Electronics GM862-QUAD-PY - Manual (Page 394)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 394 of 434
#CSURVEXT - Extended Network Survey SELINT 2
GPRS informations carried by the System Information 13 of the BCCh
AT#CSURVEXT? Read command reports whether extended network survey is currently
enabled or not, in the format:
<value>
AT#CSURVEXT=? Test command reports the range of values for parameter <value>.
3.5.7.7.10 PLMN Network Survey - #CSURVP
#CSURVP - PLMN Network Survey SELINT 2
AT#CSURVP=<plmn> Execution command performs a quick network survey through channels.
The survey stops as soon as a BCCH carriers belonging to the selected
PLMN is found.
The result format is like command #CSURV.
Parameter:
<plmn> - the desidered PLMN in numeric format
AT#CSURVP=? Test command returns OK
3.5.7.7.11 PLMN Network Survey (Numeric Format) - #CSURVPC
#CSURVPC - PLMN Network Survey (Numeric Format) SELINT 2
AT#CSURVPC=
<plmn> Execution command performs a quick network survey through channels.
The survey stops as soon as a BCCH carriers belonging to the selected
PLMN is found.
The result is given in numeric format and is like command #CSURVC.
Parameter:
<plmn> - the desidered PLMN in numeric format
AT#CSURVPC=? Test command returns OK
3.5.7.8 SIM Toolkit AT Commands
3.5.7.8.1 SIM Tookit Interface Activation - #STIA