Rainbow Electronics GM862-QUAD-PY User Manual
Page 130
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 130 of 434
+CPBW - Write Phonebook Entry
SELINT 0 / 1
<text> - the text associated to the number, string type; used character set
should be the one selected with command +CSCS.
Note: If record number <index> already exists, it will be overwritten.
Note: if only <index> is given, the record number <index> is deleted.
Note: if <index> is omitted or <index>=0, the number <number> is stored
in the first free phonebook location.
(example at+cpbw=0,2,129,"Testo" and at+cpbw=,2,129,"Testo")
Note: omission of all the subparameters causes an ERROR result code.
AT+CPBW=?
Test command returns location range supported by the current storage as
a compound value, the maximum length of <number> field, supported
number format of the storage and maximum length of <text> field. The
format is:
+CPBW: (list of supported <index>s),<nlength>,
(list of supported <type>s),<tlength>
where:
<nlength> - integer type value indicating the maximum length of field
<number>
<tlength> - integer type value indicating the maximum length of field
<text>
Reference GSM
07.07
Note
Remember to select the PB storage with +CPBS command before issuing
PB commands.
+CPBW - Write Phonebook Entry
SELINT 2
AT+CPBW=
[<index>]
[,<number>
[,<type>
[,<text>]]]
Execution command writes phonebook entry in location number <index> in
the current phonebook memory storage selected with +CPBS.
Parameters:
<index> - integer type, value in the range of location numbers of the
currently selected phonebook memory storage (see +CPBS).
<number> - string type, phone number in the format <type>
<type> - the type of number
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
<text> - the text associated to the number, string type; used character set
should be the one selected with command +CSCS.
Note: If record number <index> already exists, it will be overwritten.