11 clock management - +cclk – Rainbow Electronics GM862-QUAD-PY User Manual
Page 131
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 131 of 434
+CPBW - Write Phonebook Entry
SELINT 2
Note: if either <number>, <type> and <text> are omitted, the phonebook
entry in location <index> is deleted.
Note: if <index> is omitted or <index>=0, the number <number> is stored
in the first free phonebook location.
(example at+cpbw=0,"+390404192701",129,"Text" and
at+cpbw=,"+390404192701",129,"Text")
Note: if either “LD”, “MC” or “RC” memory storage has been selected (see
+CPBS) it is possible just to delete the phonebook entry in location
<index>, therefore parameters <number>, <type> and <text> must be
omitted.
AT+CPBW=?
Test command returns location range supported by the current storage as
a compound value, the maximum length of <number> field, supported
number format of the storage and maximum length of <text> field. The
format is:
+CPBW: (list of supported <index>s),<nlength>,
(list of supported <type>s),<tlength>
where:
<nlength> - integer type value indicating the maximum length of field
<number>.
<tlength> - integer type value indicating the maximum length of field
<text>
Note: the value of <nlength> could vary, depending on whether or not the
ENS functionality has been previously enabled (see #ENS), in the
following situations:
1. if “SM” memory storage has been selected (see +CPBS) and the
SIM supports the Extension1 service
2. if “FD” memory storage has been selected (see +CPBS) and the
SIM supports the Extension2 service
1. if “MB” memory storage has been selected (see +CPBS)
and the SIM supports the Extension6 service
Reference GSM
07.07
Note
Remember to select the PB storage with +CPBS command before issuing
PB commands.
3.5.4.4.11 Clock Management - +CCLK
+CCLK - Clock Management
SELINT 0 / 1
AT+CCLK
[=<time>]
Set command sets the real-time clock of the ME.
Parameter:
<time> - current time as quoted string in the format :
"yy/MM/dd,hh:mm:ss±zz"