Rainbow Electronics GM862-QUAD-PY User Manual

Page 193

Advertising

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 193 of 434

+CNMI - New Message Indications To Terminal Equipment

SELINT 2

=
1

<tooa>, <tosca> - type of number <oa> or <sca>:
129 - number in national format
145 - number in international format (contains the "+")
<fo> - first octet of GSM 03.40
<pid> - Protocol Identifier
<dcs> - Data Coding Scheme
<sca> - Service Centre address, string type, converted in the

currently selected character set (see +CSCS)

<length> - text length
<data> - TP-User-Data

• If <dcs> indicates that GSM03.38 default alphabet is used

and <fo> indicates that GSM03.40 TP-User-Data-Header-
Indication is not set (bit 6 of <fo> is 0), each character of
GSM alphabet will be converted into current TE character
set (see +CSCS)

• If <dcs> indicates that 8-bit or UCS2 data coding scheme is

used or <fo> indicates that GSM03.40 TP-User-Data-
Header-Indication is set (bit 6 of <fo> is 1), each 8-bit octet
will be converted into two IRA character long hexadecimal
number (e.g. octet 0x2A will be converted as two
characters 0x32 0x41)

Class 2 messages and messages in the “store” message waiting
indication group result in indication as defined in <mt>=1.

3 - Class 3 SMS-DELIVERs are routed directly to TE using

unsolicited result codes defined in <mt>=2. Messages of other
data coding schemes result in indication as defined in <mt>=1.

<bm> - broadcast reporting option
0 - Cell Broadcast Messages are not sent to the DTE
2 - New Cell Broadcast Messages are sent to the DTE with the

unsolicited result code:

(PDU Mode)

+CBM: <length><CR><LF><PDU>
where:
<length> - PDU length
<PDU> - message PDU

(TEXT Mode)

+CBM:<sn>,<mid>,<dcs>,<pag>,<pags><CR><LF><data>
where:
<sn> - message serial number
<mid> - message ID
<dcs> - Data Coding Scheme
<pag> - page number
<pags> - total number of pages of the message
<data> - CBM Content of Message

Advertising