Rainbow Electronics GM862-QUAD-PY - Manual (Page 197)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 197 of 434
+CMGL - List Messages SELINT 0 / 1
<tooa/toda> - type of number <oa/da>
129 - number in national format
145 - number in international format (contains the "+")
<length> - text length
<data> - TP-User-Data
Each message delivery confirm is represented in the format:
+CMGL: <index>,<stat>,<fo>,<mr>,,,<scts>,<dt>,<st>
where
<index> - message position in the storage
<stat> - message status
<fo> - first octet of the message PDU
<mr> - message reference number
<scts> - arrival time of the message to the SC
<dt> - sending time of the message
<st> - message status as coded in the PDU
Note: OK result code is sent at the end of the listing.
Note: If parameter is omitted the command returns the list of sms with “REC
UNREAD” status.
AT+CMGL? Read command has the same effect as Execution command with parameter
omitted
AT+CMGL=? Test command returns a list of supported <stat>s
Note If Text Mode (+CMGF=1) the Test command output is not included in
parenthesis
AT+CMGL=?
+CMGL: "REC UNREAD","REC READ","STO UNSENT",
"STO SENT","ALL"
Note The improving command @CMGL has been defined
Reference GSM 07.05
+CMGL - List Messages
SELINT 2
Note: the behaviour of command +CMGL differs depending on whether or not the improved SMS
commands operation mode has been enabled (see #SMSMODE)
(#SMSMODE=0)
#
S
M
S
M
O
D
AT+CMGL
[=<stat>] Execution command reports the list of all the messages with status
value <stat> stored into <memr> message storage (<memr> is the
message storage for read and delete SMs as last settings of
command +CPMS).
The parameter type and the command output depend on the last
settings of command +CMGF (message format to be used)