Rainbow Electronics GM862-QUAD-PY - Manual (Page 18)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 18 of 434
Command Estimated maximum time to get
response (Seconds)
#SKTOP 290 (context activation + DNS resolution
+ timeout set with AT#SKTCT)
#QDNS 20
#FTPOPEN 100
#FTPCLOSE 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#FTPTYPE 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#FTPDELE 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#FTPPWD 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#FTPCWD 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#FTPLIST 500 (timeout set with AT#FTPTO, in
case no response is received from
server) + time to get listing
#FTPPUT 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#FTPGET 500 (timeout set with AT#FTPTO, in
case no response is received from
server)
#SGACT 150
#SH 3
#SD 140 (DNS resolution + connection
timeout set with AT#SCFG)
#CSURV 10 to start data output; 120 seconds to
complete scan
#CSURVC 10 to start data output; 120 seconds to
complete scan
#CSURVU 10 to start data output; 120 seconds to
complete scan
#CSURVUC 10 to start data output; 120 seconds to
complete scan
#CSURVB 10 to start data output; 120 seconds to
complete scan
#CSURVBC 10 to start data output; 120 seconds to
complete scan
#CSURVP 10 to start data output; 120 seconds to