Rainbow Electronics GM862-QUAD-PY - Manual (Page 32)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 32 of 434
3.5.2 General Configuration Commands
3.5.2.1 AT Interface Backward Compatibility
There are some slight modifications amongst the AT interfaces of Telit products. In order to keep
backward compatibility and on the same time to give the opportunity to the customer to get competitor
compatibility, Telit modules offer the specific command #SELINT to switch the behaviour of the device
and its AT command interface. It is up to the user to select the AT interface he prefers.
The following table shows which AT commands interface can be applied and is default for the specific
product:
Product #SELINT=0 #SELINT=1 #SELINT=2
GM862-QUAD
(3990250659)
•(default) • •
GM862-QUAD-PY
(3990250658)
• •(default) •
GM862-GPS
(3990250657)
(3990250689)
• • •(default)
GE863-QUAD
(3990250662)
• •(default) •
GE863-PY
(3990250661)
• •(default) •
GE863-SIM
(3990250700)
• •(default) •
GE863-GPS
(3990250660)
(3990250690)
• • •(default)
GE863-PRO 3
(3990250698)
(3990250691)
•(default)
GE864-QUAD
(3990250648)
• • •(default)
GE864-PY
(3990250650)
• • •(default)
GE864-AUTO
(3990250701)
•(default)
GC864-QUAD
(3990250675)
• • •(default)
GC864-PY
(3990250676)
• • •(default)