Rainbow Electronics GM862-QUAD-PY - Manual (Page 58)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 58 of 434
+DR - Data Compression Reporting SELINT 0 / 1 / 2
AT+DR? Read command returns current value of <n>.
AT+DR=? Test command returns all supported values of the parameter <n>
Reference V25ter
3.5.3.6 Break Control
3.5.3.6.1 Transmit Break To Remote - \B
\B - Transmit Break To Remote SELINT 0 / 1 / 2
AT\B Execution command has no effect and is included only for backward
compatibility with landline modems
3.5.3.6.2 Break Handling - \K
\K - Break Handling SELINT 0
AT\K<n> Execution command has no effect and is included only for backward
compatibility with landline modems
Parameter:
<n>
1..5
\K - Break Handling
SELINT 1 / 2
AT\K[<n>] Execution command has no effect and is included only for backward
compatibility with landline modems
Parameter:
<n>
0..5
3.5.3.6.3 Operating Mode - \N
\N - Operating Mode SELINT 0 / 1 / 2
AT\N[<n>] Set command set the connection element to be used when data calls are
originated (see +CBST).
Parameter:
<n>
0 - transparent
1..6 - non-transparent
Note: issuing AT\N<CR> is the same as AT\N0<CR>