Rainbow Electronics GM862-QUAD-PY - Manual (Page 76)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 76 of 434
+CEER - Extended Error Report SELINT 2
AT+CEER=? Test command returns OK result code.
Reference GSM 07.07, GSM 04.08
3.5.4.2.6 Cellular Result Codes - +CRC
+CRC - Cellular Result Codes SELINT 0 / 1
AT+CRC=<mode> Set command controls whether or not the extended format of incoming call
indication is used.
Parameter:
<mode>
0 - disables extended format reporting (factory default)
1 - enables extended format reporting
When enabled, an incoming call is indicated to the TE with unsolicited result
code:
+CRING:<type>
instead of the normal RING.
where
<type> - call type:
DATA
FAX - facsimile (TS 62)
VOICE - normal voice (TS 11)
AT+CRC? Read command returns current value of the parameter <mode>.
AT+CRC=? Test command returns supported values of the parameter <mode>.
Reference GSM 07.07
+CRC - Cellular Result Codes
SELINT 2
AT+CRC=
[<mode>] Set command controls whether or not the extended format of incoming call
indication is used.
Parameter:
<mode>
0 - disables extended format reporting (factory default)
1 - enables extended format reporting:
When enabled, an incoming call is indicated to the TE with unsolicited result
code
+CRING: <type>
instead of the normal RING.