Rainbow Electronics GM862-QUAD-PY - Manual (Page 331)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 331 of 434
#FTPPWD - FTP Print Working Directory SELINT 0 / 1
Note: The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
#FTPPWD - FTP Print Working Directory
SELINT 2
AT#FTPPWD Execution command, issued during an FTP connection, shows the current
working directory on FTP server.
Note: The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
AT#FTPPWD=? Test command returns the OK result code.
3.5.7.4.10 FTP Change Working Directory - #FTPCWD
#FTPCWD - FTP Change Working Directory SELINT 0 / 1
AT#FTPCWD=
<dirname> Execution command, issued during an FTP connection, changes the
working directory on FTP server.
Parameter:
<dirname> - string type, it’s the name of the new working directory.
Note: The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
#FTPCWD - FTP Change Working Directory
SELINT 2
AT#FTPCWD=
[<dirname>] Execution command, issued during an FTP connection, changes the
working directory on FTP server.
Parameter:
<dirname> - string type, it’s the name of the new working directory.
Note: The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
AT#FTPCWD=? Test command returns the OK result code.
3.5.7.4.11 FTP List - #FTPLIST
#FTPLIST - FTP List SELINT 0 / 1