Rainbow Electronics GM862-QUAD-PY User Manual

Page 51

Advertising
background image




AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved

page 51 of 434

D – Dial

SELINT 0 / 1

”R”, ”,”, ”W”, “!”, “@” are accepted but have no effect.

ATD><str>[;]

Issues a call to phone number which corresponding alphanumeric field is
<str>; all available memories will be searched for the correct entry.


If “;” is present a voice call is performed.

Parameter:
<str> - alphanumeric field corresponding to phone number; it must be

enclosed in quotation marks.


Note: parameter <str> is case sensitive.

Note: used character set should be the one selected with command Select
TE character set +CSCS.

ATD><mem><n>[;]

Issues a call to phone number in phonebook memory storage <mem>,
entry location <n> (available memories may be queried with
AT+CPBS=?).

If “;” is present a voice call is performed.

Parameters:
<mem> - phonebook memory storage; it must not be enclosed in quotation

marks.

SM - SIM phonebook
FD - SIM fixed dialling-phonebook
LD - SIM last-dialling-phonebook
MC - device missed (unanswered received) calls list
RC - ME received calls list

<n> - entry location; it should be in the range of locations available in the
memory used.

ATD><n>[;]

Issues a call to phone number in entry location <n> of the active
phonebook memory storage (see +CPBS).
If “;” is present a voice call is performed.

Parameter:
<n> - active phonebook memory storage entry location; it should be in the
range of locations available in the active phonebook memory storage.

ATDL

Issues a call to the last number dialed.

ATDS=<nr>[;]

Issues a call to the number stored in the MODULE internal phonebook
position number <nr>.
If “;” is present a VOICE call is performed.

Parameter:
<nr> - internal phonebook position to be called (See either &N and &Z)

ATD<number>I[;]
ATD<number>i[;]

Issues a call overwriting the CLIR supplementary service subscription
default value for this call
If “;” is present a VOICE call is performed.

Advertising