Rainbow Electronics GM862-QUAD-PY - Manual (Page 379)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 379 of 434
#CSURV - Network Survey SELINT 2
<CR><LF><CR><LF><CR><LF>
where:
<arfcn> - C0 carrier assigned radio channel (BCCH - Broadcast Control
Channel)
<bsic> - base station identification code; if #CSURVF last setting is 0,
<bsic> is a decimal number, else it is a 2-digits octal number
<rxLev> - decimal number; it is the receiption level (in dBm)
<ber> - decimal number; it is the bit error rate (in %)
<mcc> - hexadecimal 3-digits number; it is the mobile country code
<mnc> - hexadecimal 2-digits number; it is the mobile network code
<lac> - location area code; if #CSURVF last setting is 0, <lac> is a decimal
number, else it is a 4-digits hexadecimal number
<cellId> - cell identifier; if #CSURVF last setting is 0, <cellId> is a decimal
number, else it is a 4-digits hexadecimal number
<cellStatus> - string type; it is the cell status
..CELL_SUITABLE - C0 is a suitable cell.
CELL_LOW_PRIORITY - the cell is low priority based on the received
system information.
CELL_FORBIDDEN - the cell is forbidden.
CELL_BARRED - the cell is barred based on the received system
information.
CELL_LOW_LEVEL - the cell <rxLev> is low.
CELL_OTHER - none of the above e.g. exclusion timer running, no
BCCH available…etc.
<numArfcn> - number of valid channels in the Cell Channel Description
<arfcnn> - arfcn of a valid channel in the Cell Channel Description (n is in
the range 1..<numArfcn>)
<numArfcn> - decimal number; it is the number of valid channels in the
Cell Channel Description
<arfcnn> - decimal number; it is the arfcn of a valid channel in the Cell
Channel Description (n is in the range 1..<numArfcn>)
<numChannels> - decimal number; it is the number of valid channels in
the BCCH Allocation list; the output of this information for non-
serving cells depends on last #CSURVEXT setting:
2. if #CSURVEXT=0 this information is displayed only for
serving cell
3. if #CSURVEXT=1 or 2 this information is displayed also for
every valid scanned BCCH carrier.
<ban> - decimal number; it is the arfcn of a valid channel in the BA list (n
is in the range 1..<numChannels>); the output of this
information for non-serving cells depends on last #CSURVEXT
setting:
2. if #CSURVEXT=0 this information is displayed only for
serving cell
3. if #CSURVEXT=1 or 2 this information is displayed also for
every valid scanned BCCH carrier.