Rainbow Electronics GM862-QUAD-PY - Manual (Page 390)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 390 of 434
3.5.7.7.5 BCCH Network Survey - #CSURVB
#CSURVB - BCCH Network Survey SELINT 0 / 1
AT#CSURVB=<n> Execution command performs a quick network survey through M (maximum
number of available frequencies depending on last selected band) channels.
The survey stops as soon as <n> BCCH carriers are found.
The result format is like command #CSURV.
Parameter:
<n> - number of desired BCCH carriers
1..M
AT#CSURVB=? Test command reports the range of values for parameter <n> in the format:
(1-M)
where M is the maximum number of available frequencies depending on last
selected band.
#CSURVB - BCCH Network Survey
SELINT 2
AT#CSURVB=
[<n>] Execution command performs a quick network survey through M (maximum
number of available frequencies depending on last selected band) channels.
The survey stops as soon as <n> BCCH carriers are found.
The result format is like command #CSURV.
Parameter:
<n> - number of desired BCCH carriers
1..M
AT#CSURVB=? Test command reports the range of values for parameter <n> in the format:
(1-M)
where M is the maximum number of available frequencies depending on last
selected band.
3.5.7.7.6 BCCH Network Survey (Numeric Format) - #CSURVBC
#CSURVBC - BCCH Network Survey (Numeric Format) SELINT 0 / 1
AT#CSURVBC=
<n> Execution command performs a quick network survey through M (maximum
number of available frequencies depending on last selected band) channels.
The survey stops as soon as <n> BCCH carriers are found.
The result is given in numeric format and is like command #CSURVC.
Parameter:
<n> - number of desired BCCH carriers
1..M