Rainbow Electronics GM862-QUAD-PY User Manual

Page 376

Advertising

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 376 of 434

#CSURV - Network Survey

SELINT 0 / 1

<CR><LF><CR><LF><CR><LF>

where:
<arfcn> - C0 carrier assigned radio channel (BCCH - Broadcast Control

Channel)

<bsic> - base station identification code
<rxLev> - receiption level (in dBm)
<ber> - bit error rate (in %)
<mcc> - mobile country code
<mnc> - mobile network code
<lac> - location area code
<cellId> - cell identifier
<cellStatus> - cell status
..CELL_SUITABLE - C0 is a suitable cell.
CELL_LOW_PRIORITY - the cell is low priority based on the received

system information.

CELL_FORBIDDEN - the cell is forbidden.
CELL_BARRED - the cell is barred based on the received system

information.

CELL_LOW_LEVEL - the cell <rxLev> is low.
CELL_OTHER - none of the above e.g. exclusion timer running, no

BCCH available…etc.

<numArfcn> - number of valid channels in the Cell Channel Description
<arfcnn> - arfcn of a valid channel in the Cell Channel Description (n is in

the range 1..<numArfcn>)

<numChannels> - number of valid channels in the BCCH Allocation list;

the output of this information for non-serving cells depends on
last #CSURVEXT setting:
1. if

#CSURVEXT=0 this information is displayed only for

serving cell

2. if

#CSURVEXT=1 or 2 this information is displayed also for

every valid scanned BCCH carrier.

<ban> - arfcn of a valid channel in the BA list (n is in the range

1..<numChannels>); the output of this information for non-
serving cells depends on last #CSURVEXT setting:
1. if