Rainbow Electronics GM862-QUAD-PY - Manual (Page 127)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 127 of 434
+CPBR - Read Phonebook Entries SELINT 2
currently selected phonebook memory storage (see +CPBS).
The response format is:
[+CPBR: <index1>,<number>,<type>,<text>[<CR><LF>
+CPBR: <index2>,<number>,<type>,<text>[…]]]
where:
<indexn> - the location number of the phonebook entry
<number> - string type phone number of format <type>
<type> - type of phone number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
<text> - the alphanumeric text associated to the number; used character set
should be the one selected with command +CSCS.
Note: if “MC” is the currently selected phonebook memory storage, a
sequence of missed calls coming from the same number will be saved as
one missed call and +CPBR will show just one line of information.
Note: If all queried locations are empty (but available), no information text
lines will be returned, while if listing fails in an ME error, +CME ERROR:
<err> is returned.
AT+CPBR=? Test command returns the supported range of values for parameters
<indexn> and the maximum lengths of <number> and <text> fields, in the
format:
+CPBR: (<minIndex> - <maxIndex>),<nlength>,<tlength>
where:
<minIndex> - the minimum <index> number, integer type
<maxIndex>- the maximum <index> number, integer type
<nlength> - maximum <number> field length, integer type
<tlength> - maximum <name> field length, integer type
Note: the value of <nlength> could vary, depending on whether or not the
ENS functionality has been previously enabled (see #ENS), in the
following situations:
1. if “SM” memory storage has been selected (see +CPBS) and the
SIM supports the Extension1 service
2. if “FD” memory storage has been selected (see +CPBS) and the
SIM supports the Extension2 service
3. if “MB” memory storage has been selected (see +CPBS) and the
SIM supports the Extension6 service
Note Remember to select the PB storage with +CPBS command before issuing
PB commands.
Reference GSM 07.07