9 extended network survey - #csurvext – Rainbow Electronics GM862-QUAD-PY User Manual

Page 393

Advertising

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 393 of 434

#CSURVNLF - <CR><LF> Removing On Easy Scan® Commands Family

SELINT 2

AT#CSURVNLF?

Read command reports whether automatic <CR><LF> removing is currently
enabled or not, in the format:

<value>

AT#CSURVNLF=?

Test command reports the range of values for parameter <value>.

3.5.7.7.9 Extended Network Survey - #CSURVEXT

#CSURVEXT - Extended Network Survey

SELINT 0 / 1

AT#CSURVEXT
[=<value>]

Set command enables/disables extended network survey.

Parameter:
<value>
0 - disables extended network survey (factory default)
1 - enables extended network survey; all the network survey execution

commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier

2 - enables extended network survey; all the network survey execution

commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier and, if GPRS is supported in the cell, they report some
GPRS informations carried by the System Information 13 of the BCCh

Note: if parameter is omitted the behaviour of Set command is the same as
Read command.

AT#CSURVEXT?

Read command reports whether extended network survey is currently
enabled or not, in the format:

<value>

AT#CSURVEXT=?