O2-12 fault trace / fault history clear function, O2-14 kwh user monitor initialization – Yaskawa iQpump Controller Programming Manual User Manual
Page 138
Advertising
138
YASKAWA
TM.iQp.07 iQpump Controller Programming Manual
◆
o2-12 Fault Trace / Fault History Clear Function
The operator can clear the Fault Trace (U2) and Fault History logs by setting o2-12 = “1: Enabled”. Clearing the Fault Trace and Fault
History logs erases all the information.
◆
o2-14 kWh User Monitor Initialization
The kWh monitors (U1-29 and U1-30) track the power usage of the iQpump drive and are not reset by powering down the drive. To reset
the monitors back to zero, set o2-14 = “1: Clear all”.
Setting
Description
0
Disabled (No Effect) (
factory default
)
1
Enabled
Setting
Description
0
Disabled (No Change) (
factory default
)
1
Clear All
Advertising