Yaskawa iQpump Controller Programming Manual - Manual (Page 24)

24 YASKAWA TM.iQp.07 iQpump Controller Programming Manual
◆ b1-11 Drive Delay Time Setting
Setting Range: 0 ~ 600 s
Factory Default: 0 s
If a time is set into parameter b1-11, the iQpump drive will delay executing any run command until the b1-11 time has expired. During
iQpump drive delay time execution, the digital operator will display:
Both the ALARM and Run indicators will blink while the iQpump drive waits to execute the Run command.
DDLY
Waiting to RUN