Yaskawa iQpump Controller Programming Manual - Manual (Page 84)

84 YASKAWA TM.iQp.07 iQpump Controller Programming Manual
■
Function: Lube Pump (Setting: 55)
<0034>
Closed: When the Lube Pump Feature is active.
■
Function: High Flow (Setting: 56)
<0034>
CLosed: During the “High Flow Fault” condition - OR -
Closed: During a high flow condition as set by P6-12 ~ P6-14 (includes “High Flow Alarm”).
■ Function: Low Water Level (Setting: 57)
<0034>
Closed: During the “Low Water Level” condition as set by P8-07 and P8-08. - OR -
Closed: During the “LOWWL - Low Water Level Fault”.
Refer to iQpump MEMOBUS / Modbus Status Registers (#728).