1 emergency mode (emer mode), Instructions. see, Section 3.1.1 – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 100
Advertising
3 - 6
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
3.1.1 Emergency Mode (EMER MODE)
In an emergency, the concentrator cleanout can be bypassed to allow for faster
startup. This is not recommended for everyday use. To place the system into
Emergency Mode:
1
Touch EMER MODE while the PREPARING SYSTEM message is displayed.
See
Figure 3-9
.
Figure 3-9 Emergency Mode
2
Alternately, use the arrow keys to highlight the EMER MODE button and push
OK SEL. See
Figure 3-10
.
Figure 3-10 Arrow Keys
Advertising