INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 70
Advertising
2 - 32
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 2-52 Tightening the Bottom Nut
6
Continue pressing on the top elbow and tighten the top nut finger tight. See
Figure 2-53
.
Figure 2-53 Tightening the Top Nut
7
Using the 7/16" open end wrench supplied with the HAPSITE, tighten both the
top and bottom nut approximately 1/8-1/4 of a turn. When pressure is released
from the top fitting, the elbow should not move. When gentle upward pressure
Advertising