3 concentrator cleanout failure, Section 3.1.3, concentrator – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 105
3 - 11
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
2
Touch Skip Cleanout or highlight Skip Cleanout using the arrow keys. Push
OK SEL. See
Figure 3-15
.
Figure 3-19 Skip Cleanout
3
The system will not run a cleanout as part of its preparation.
3.1.3 Concentrator Cleanout Failure
If the concentrator cleanout is successful, the screen will display the final TIC. See
Figure 3-20
.
Figure 3-20 Cleanout Successful
If the concentrator cleanout is unsuccessful, the screen will display a concentrator
cleanout failed message. See the instructions below for cleanout options.
1
Touch Retry to start another concentrator cleanout sequence.
2
Touch Skip to start running a concentrator Analyze method.
3
Touch Abort to return to the Main Screen.
NOTE: If Abort is touched, the HAPSITE will show that the SYSTEM IS NOT
READY.