INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 520)

16 - 22
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
16.7.1 Required Tools and Equipment
 Service Module (not pictured)
 Laptop computer (not pictured)
 New NEG Pump
 1/4” Allen wrench
 Torque wrench set for 70 inch/pounds
 Gloves (cotton or latex)
 Lint free wipes
 Methanol
 MicroDuster® III (containing 1,1,1,2 tetrafluoroethane)
CAUTION
Refer to the MSDS for Personal Protection Equipment
(PPE) guidelines, wipe all tools with methanol before
starting this procedure.
Figure 16-18 Required Tools and Equipment