2 storing the hot swap cable, 3 use as an additional battery source – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 93
Advertising
2 - 55
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
2.14.2 Storing the Hot Swap Cable
The Hot Swap Cable and Battery have exposed electrical connections. Protect the
connections from moisture or contaminated environments by storing the battery
and cable connection in a protective plastic bag. See
Figure 2-76 Storing
2.14.3 Use as an Additional Battery Source
Attach the Battery to the HAPSITE via the Hot Swap Cable when the front panel
shows the level of charge on the internal battery is
20%. This will provide an
additional battery source.
Advertising