INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 45)

2 - 7
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
2.4.2 Remove Exhaust (Vent) Cap
The red exhaust (vent) cap is located on the right side of the HAPSITE near the
back. This exhaust (vent) cap must be removed for the HAPSITE to function
properly. The HAPSITE is shipped with the cap removed. See
Figure 2-13 .
Figure 2-13 Exhaust Cap Removed
CAUTION
The exhaust cap must be removed for proper HAPSITE
operation.
WARNING
Samples will vent to breathing area through the exhaust.
To avoid inhalation, attach tubing and vent to a hood or
attach an activated charcoal filter if sample is hazardous.