INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 500)

16 - 2
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
16.2 Safety Considerations
WARNING
When operating, the NEG Pump is hot! Do not remove
when hot or slightly warm. Always allow NEG to
completely cool before removing. Burns may result from
handling the hot flange and the NEG will become
unusable.
WARNING
Metal alloys within the NEG Pump may ignite if exposed
to atmospheric pressure while hot. If ignition occurs,
drop pump into a bucket of sand and cover with
additional sand. If this is not practical, set the pump on its
black plastic base on a non-flammable surface. The NEG
Pump will burn out in a few minutes.
WARNING - Risk Of Electric Shock
Whenever accessing the internal components of the
Service Module, always disconnect the power cord and
remove the battery to reduce the danger of electrical
shock.
WARNING - Risk Of Electric Shock
The cover of the HAPSITE should never be removed. No
serviceable parts inside.