INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 144)

3 - 50
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
3.7.1 System Parameters
System Parameters provides information about the operation of the HAPSITE
and its consumables. Information regarding battery power, gas consumption,
heaters, tune status, and GPS can be accessed through this screen.
1 The System Parameters screen can be displayed by touching the HAPSITE
Smart Plus icon. See
Figure 3-82 .
Figure 3-82 HAPSITE Icon
2 Alternately, push the SYSTEM STAT button until the HAPSITE icon is
highlighted.
Figure 3-83 SYSTEM STAT Push Button