INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 246)

7 - 4
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
7.3 Viewing a Tune Report
The Tune Report can be viewed from the front panel display or from the Laptop
computer. See
Figure 7-6 . Tune Reports are stored on the HAPSITE. Therefore, to
access Tune Reports from the Laptop computer, the HAPSITE must be connected
to the Laptop.
To view the report from the Laptop computer select File. Then select View Tune
Reports from the drop down menu. Highlight the default.tun file and press OK.
The Tune Files and Tune Reports are displayed. Tune Reports can also be
accessed by highlighting the HAPSITE icon, or by pressing the right mouse button
and selecting Tune Reports. Tune Reports are stored, by default, for the last 30
days. The Tune Reports display offers the following functions:
Remove . . . . . . . . . . . . . . . . . . . . . . Deletes the selected report. NO
CONFIRMATION IS REQUESTED.
Remove Older Than . . . . . . . . . . . . Deletes files older than the number of days
specified. Confirmation is requested before
the files are deleted.
Export to Tune File . . . . . . . . . . . . . Converts a Tune Report into a valid Tune file.
This feature can be used to recover a good
Tune if the current Tune file has been
corrupted.
Export to text file . . . . . . . . . . . . . . Creates a text file copy of the Tune Report.
Print . . . . . . . . . . . . . . . . . . . . . . . . . Prints a copy of the selected Tune Report.
Figure 7-6 Tune Reports Screen from Laptop Computer