INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 340)

9 - 32
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 9-38 AMDIS Confirm Window
This window shows the complete analysis, peak by peak. If there are any peaks
that were not identified by AMDIS, use the NIST database to identify them.
9.8.3.1 Accessing NIST from AMDIS
To use the NIST database to identify a peak not identified by AMDIS:
1 Highlight the peak not identified by clicking on the triangle above the peak
2 Select Analyze >> Add component/scan to search list
3 Select Analyze >> Go to NIST MS Program
This will place the selected component scan from the search list into the NIST
program and will utilize the NIST database for identification. See
Figure 9-39 .