4 tune files – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 350
10 - 4
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 10-4 Method Editor - Data, Showing File Name Options
The system allows flexibility to add Date or Date and Time as a prefix or suffix. A
different naming convention if Use Default Filename is not selected.
10.1.4 Tune Files
Refer to
for additional information on Tune.
NOTE: Manual Tuning requires Advanced access. Normal users do not have
access to Manual Tune. Refer to
section 8.9, Access Levels, on page 8-23
for additional information on Access Levels.
If Manual Tune is performed, the file must be saved to the Tune folder on the
HAPSITE.
Figure 10-5
shows a typical Manual Tune screen, which is opened by
selecting the Tune icon in the System Setup window, or by right-clicking on a
sensor icon and selecting Tune. To save changes made during manual tuning,
press the Save Tune button on the Sensor Toolbar and tune will be saved
immediately. Other ways to save a tune file include using File >> Save, File >>
Save As, or Tune >> Save Tune Parameters.