INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 170)

3 - 76
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
12 To view the chromatogram while the method is running, touch GRAPH.
Alternately, use the arrow keys to highlight GRAPH. Push OK SEL.
Figure 3-124 Graph View SituProbe
NOTE: This screen will also display the TIC Max, the current TIC Count and
the time remaining.
13 Touching the blue compound identification above the chromatogram will
display its NIOSH database information.
14 When finished, a METHOD FINISHED message will be displayed.
Figure 3-125 SituProbe Method Finished
NOTE: Another Analyze (GC/MS) method can be started immediately after
one has completed. Depending on the temperature profile, the column
may need to cool before another run will begin.
NOTE: Refer to Section 3.5.1, View Results/View Reports, on page 3-32 for
more information on reviewing the data.