INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 397)

11 - 37
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 11-28 AMDIS Search Settings
Figure 11-29 lists the different analysis types available for the search.
Figure 11-29 Type of Analysis
Analysis Type
 Simple - Uses only the mass spectral data for the individual target compounds
in the library to identify the compounds. The calculated match factor depends
only on the quality of the match between the deconvoluted component spectra
and the target library spectra.
 RI Calibration Data - This type of analysis uses an external calibration file.
This analysis assumes that on a periodic basis, an experiment is run to
generate a correlation between retention time and retention index for a set of