INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 408)

11 - 48
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Data File Path . . . . . . . . . . . . . . . . . The entry box for the data file path is used to
specify where this method should save the
data. This entry box is automatically filled
with the default path, derived from the
HAPSITE Properties >> Data Settings
page, if the Use default directory box is
checked.
Save Data to Removable Drive . . . This selection is always enabled and cannot
be changed. Data is saved to the hard drive
in the folder (directory) shown immediately
above this check box.