1 ric plot to locate specific compounds – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 329
Advertising
9 - 21
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 9-20 RIC Plot
When the box in the Control Panel labeled -RIC is checked, the TIC/RIC window
will display the TIC minus the RIC selected.
9.7.1 RIC Plot to Locate Specific Compounds
NOTE: Before running NIST, position the scan cursor over the peak of interest in
the TIC plot.
1
Either from the System Setup View or the Data Review screen, double-click on
the NIST icon. See
Figure 9-21 NIST Icon
2
Click on the NAMES tab at the bottom of the NIST screen. See
Figure 9-22 NIST Names Tab
Advertising