INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 299)

8 - 23
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
4 Select the correct Time Zone from the drop-down list above the map.
5 Press OK and reboot the HAPSITE. A reboot is required to set the Time Zone.
6 Return to the dialog shown in Figure 8-35 to synchronize the Laptop and
HAPSITE data and time.
7 Click on Set HAPSITE Date/Time to PC Date/Time. Press OK. Refer to Figure
8-35 .
8 The HAPSITE will be synchronized with the Date and Time of the computer.
8.9 Access Levels
There are two user Access Levels which can be set in Plus IQ: Normal and
Advanced. Neither Access Level is installed with a password.
Normal users can run samples, view results and perform basic operations with
HAPSITE Plus.
Advanced is a higher level which allows access to all user operations. This includes
everything a Normal user is allowed plus Tune, Method Editor, and some service
actions.
WARNING
The Advanced user level allows changes to key
setpoints. Trained users should only adjust these
setpoints to prevent adjustments that may result in
inaccurate data collection.
The default access level is Normal, and no password is set by the factory. To
restrict access to advanced functions, an Advanced user password can be set.
Once the password is set, the password must be entered each time the Plus IQ
program is restarted, or whenever the access level is changed from Normal to
Advanced.
NOTE: Lost passwords may delay Service and Repairs.