1 european usage restrictions – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 176
4 - 4
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
This symbol indicates compliance with the essential requirements of Directive
73/23/EEC and the essential requirements of articles 3.1(b), 3.2 and 3.3 of
Directive 1999/5/EC. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
EN 300 328-2 — Electromagnetic compatibility and Radio spectrum Matters
(ERM); Wideband Transmission systems; data transmission equipment
operating in the 2.4 GHz ISM band and using spread spectrum modulations
techniques.
EN 301 489-17 — Electromagnetic compatibility and Radio Spectrum Matters
(ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 17: Specific conditions for 2.4 GHz wideband transmission
systems and 5 GHz high performance RLAN equipment.
EN 61010-1 — Safety requirements for electrical equipment for measurement,
control and laboratory use.
4.1.4.1 European Usage Restrictions
CAUTION
European usage restrictions apply to this equipment!
The end user must comply with the usage restrictions
noted in the table below when operating this equipment
in the counties that have restrictions.
The Hapsite Smart Plus is marked with the following symbol:
This symbol indicates that usage restrictions apply to this equipment. Such
marking indicates that the end user must comply with the following statements
about usage restrictions:
To ensure compliance with local regulations, be sure to select the country in
which the access point is installed.
This instrument can be used as shown in