INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 412
11 - 52
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
5
To save a newly created method from the Method Editor, press the Save button
at the bottom right of the Method Editor Summary Page (see
Figure 11-45
). The
dialog window shown in
is displayed. Notice that the default
location to save a method file is to the HAPSITE.
NOTE: Method files can be saved to the HAPSITE only if the HAPSITE is
attached to the Laptop. Refer to
section 2.4.6, Connect Laptop (if
for additional information on how to connect the
Laptop and HAPSITE.
Figure 11-49 Save Method File Dialog Window - HAPSITE Option Selected
6
On the File Name line, type a NEW file name. Refer to
.
Figure 11-50 Entering a New Method File Name
7
The file location may be changed to save in the GCMS (Analyze) or Survey
directory, or a new one may be created using the Create Folder button, as
shown in
Figure 11-51
.