INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 52)

2 - 14
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Transfer Line (INFICON part number 931-401-P2) — A directional heated line
which connects the HSS to the HAPSITE. The line transfers the sample from the
HSS to HAPSITE and provides communication between the two instruments. Each
end is labeled to ensure proper orientation.
Transfer Line Insulation (INFICON part number 931-405-P1) — This foam sleeve
is used as insulation for the Transfer Line. The insulation extends battery life by
reducing the energy required to heat the line. Once heated, it helps to maintain the
temperature.
Replacement Needle Kit (INFICON part number 931-402-P1)— A new needle
assembly for when the original needle is worn, plugged, or broken.
HSS Carrying Shoulder Strap (INFICON part number 036-015)— A strap which
connects to the mounts on the sides of the HSS. It facilitates carrying the
instrument between the office and the field.
Y-Cable (INFICON part number 600-1131-P30)— A power cable to split the power
from the AC to DC power converter to both the HAPSITE and the HSS or
SituProbe.