INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 489
Advertising
15 - 15
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
6
When the Attach procedure is finished, the following message will be displayed
on the screen.
Figure 15-18 Attach Successful
15.7.2 Attaching the HAPSITE to the Service Module using the HAPSITE
Front Panel Controls
1
To avoid running the start up method or AutoTune, touch STOP PREPARE.
See
Figure 15-19 Stop Prepare Button
1a
If using the push button keys, highlight STOP PREPARE with the arrow keys.
Push OK SEL.
2
The SYSTEM IS NOT READY! message will appear.
3
Touch the Accessories icon or push the STAT key until the probe page
appears. See
.
Advertising