Figure 5-20 – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 222
5 - 16
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 5-20 AutoTune Complete
5
A Concentrator Cleanout will also be run as part of the HAPSITE’s preparation.
If the Cleanout is successful, a green SYSTEM READY message will be
displayed. If the Cleanout is unsuccessful, refer to
Cleanout Failure, on page 3-11
. If this method is not the desired method, refer
to
Section 5.3, Selecting a New Method, on page 5-7
.
6
Click the RUN METHOD icon. Click on the GC/MS folder. Click on the folder of
the desired configuration and then click on the method folder. See Steps 2-4 of
.
7
Once all temperature zones have reached their setpoints, a prompt will appear
Press RUN to start method.
8
Click RUN button on the pop-up window or from the control panel on the
screen.
Figure 5-21 Run Button
9
When the HAPSITE screen prompts Collect Sample Now, sample for the
specified amount of time. See
.
Figure 5-22 Collecting Sample for Concentrator