2 the main menu, 1 smart interface – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 184
4 - 12
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
4.2 The MAIN Menu
The MAIN menu contains the following options: View Results, Smart Interface,
Adjust Brightness and Touch Screen. See
Figure 4-5
. For information regarding
section 3.5.1, View Results/View Reports, on page 3-32
. The
Smart Interface option will run the HAPSITE Smart Plus using the HAPSITE
Smart software. This makes transitioning from the Smart Software to the Smart
Plus software easier. Adjust Brightness changes the level of lighting on the touch
screen. The Touch Screen option will enable or disable the touch screen. The
Touch Screen option also contains a touch screen calibration feature.
4.2.1 Smart Interface
To convert to the HAPSITE software, follow the procedure below.
1
Touch MAIN. See
Figure 4-5
.
Figure 4-5 MAIN Button
2
Alternately, use the arrow keys to highlight MAIN and push OK SEL. See
Figure 4-6
.
Figure 4-6 Arrow Keys
3
Touch Smart Interface or using the arrow keys, highlight Smart Interface and
push OK SEL. See
Figure 4-7
.