INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 405)

11 - 45
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Display. . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered which will determine the critical
concentration level at which a peak will be
displayed.
Alarm . . . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered which will trigger an alarm. The
alarm can be set to be either visual or audible
by using the Settings button. See
Figure
11-41 .
Figure 11-41 Setting the Alarm
Report . . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered which will create a report when the
critical concentration level is reached. See
Figure 11-42 .
Figure 11-42 Setting the Report
There are two choices for reports, the Full TIC Peak Report and the AMDIS
Search Report.