2 configuring the hapsite for communications – INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 291
8 - 15
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
8.6.2 Configuring the HAPSITE for Communications
1
If communication between the HAPSITE and the Laptop could not be
established using
Section 8.6.1, Setting Up Communications, on page 8-13
continue with
2
Press the STAT key on the front panel of the HAPSITE until the System
Parameters page is displayed.
3
Use the arrow keys to highlight NET, push OK SEL. Alternately, touch NET.
The IP address of the HAPSITE will be displayed. Example: 10.210.4.62 /
255.254.0.0. Each HAPSITE will have a unique IP address.
4
On the Laptop, press Start. Depending on the Laptop’s setup follow either
.
4a
Click on Settings, drag the cursor over Network Connections, drag the cursor
over Local Area Connection and click the Left Mouse Button. See
NOTE: For wireless connections, select Wireless Network Connection.
Figure 8-23 Network Connections Classic View