INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 109
3 - 15
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
5
The PREPARING message will again be displayed. See
Figure 3-25
. Refer to
steps 4-9 of
Section 3.2, Selecting a Different Method Using the SELECT
for further instructions on system preparation.
Figure 3-25 Preparing System
6
If the SYSTEM READY, ANALYZE READY or SURVEY READY message is
already displayed and the prepared method is not the desired one, touch
SELECT METHOD. See
Figure 3-26
.
Figure 3-26 Selecting New Method
7
Scroll up and down with the scroll bar or use the arrow keys to highlight the
desired method, as shown in Step 4 of
. Touch Select or highlight
Select using the arrow keys and push OK SEL.
8
The HAPSITE will begin preparing the new method. Refer to Steps 4-9 of
Section 3.2, Selecting a Different Method Using the SELECT METHOD Icon,
on page 3-13
for further instructions on system preparation.